Products
WALL MOUNTED ULTRASONIC FLOWMETER
ADDAMS – T SERIES
Features
• Measurement accuracy 1%.
• Convertor protection class IP67, transducer protection class IP68.• Wide measurement range, pipe size from DN15mm to DN6000mm.• Three types installation method: wall mounted , DIN-rail mounted , explosion-proof box mounted.
• Connect the temperature transducer can finish the heat/energy— measurement.
ULTRASONIC HEAT METER QALCOSONIC E 2
Axioma
SPECIAL FEATURES
• Heat meter can be used for heat and flow measurements in closed or open-loop heat supply systems.
• Two flow measurement channels.
• Two pressure measurement channels.
• Two pulse inputs for additional flow sensors.
• Pre-programmed or measured pressure values may be used for energy calculation.
CAV controllers Type RN
RN
For the precise control of constant volume flow rates
- Circular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems Volume flow rate can be set using an external scale, no tools required
- High control accuracy
- No on-site test measurements required for commissioning
- Suitable for airflow velocities of up to 12 m/s
- Any installation orientation; maintenance-free
- Casing air leakage to EN 1751, class C
ABB general purpose drives
ABB
ACS310 drives for a wide range of variable torque applications
ABB general purpose drive, ACS310 is easy to select and easy to use. It is enough for most basic applications with no high overload demands. ACS310 is suitable for wide range of variable torque applications and simple machines.
The drive’s dedicated pump and fan features lower operating costs, boost energy efficiency and reduces CO2 emissions. Included amongs these features are built-in PID controllers and PFC (pump and fan control) that varies the drive’s performance in response to changes in pressure, flow or other external data.
Clean Air Solution
Ripple Effect
- Kills bacteria, mold and virus
- Reduces odors and VOCs (chemical odors)
- Easier, Faster, No Tool Cell Replacement
Frese OPTIMA Compact
Frese
Application
Frese OPTIMA Compact pressure independent balancing & control valve (PIBCV) is used in heating and cooling systems in applications with Fan Coil Units, Chilled Beams or other terminal unit applications.
Frese OPTIMA Compact provides modulating control with full authority regardless of any fluctuations in the differential pressure of the system.
Frese OPTIMA Compact actuators
Frese
Application
Proportional 0-10V or 3-position modulating or On/ Off control of Frese OPTIMA Compact valves in heating, ventilating and air conditioning systems.
The actuator can be mounted on the valve by hand and without the need of a specific tool.